Helsinki

Petite, powerful
Bluetooth loudspeaker
with incredible sound

White arrow pointing down

Helsinki


오직 자연만이 헬싱키의 순수하고 간결한 북유럽 디자인을 완성할 수 있습니다.

헬싱키를 감싸고 있는 패브릭은 덴마크 텍스타일 브랜드, 크바드라트(Kvadrat)에 의해 조심스럽게 짜여졌습니다. 견고한 알루미늄 프레임은 여러 조각으로 이어진 것이 아닌 하나의 피스로 제작되어 조립 시에 발생할 수 있는 마크나 스폿을 전혀 발견할 수 없습니다. 가죽 스트랩은 스웨덴 가죽 제조사인 탄조 가르베리(Tärnsjö Garveri)에서 제작한 것으로, 가공되지 않은 순수한 재료들을 이용하여 아름답게 나이가 드는 제품을 완성하였습니다.

vifa-product106377jpg
vifa-product106391jpg
vifa-product106577jpg
vifa-product106386_72dpijpg
20141215_vifa21594_72-dpijpg
helsinki-misty-blue-106339-300dpijpg

RED DOT DESIGN AWARD 2016


작지만 강력한 포터블 블루투스 스피커, 헬싱키가 세계적으로 명성 높은 디자인 어워드인 ‘Reddot Design Award 2016’에서 베스트 제품 디자인으로 선정되었습니다

undefined

helsinki-misty-blue-21993-72dpijpg

Because I'm happy


당신의 선택은 당신이 누구인지, 또 어떤 모습이 되길 원하는지를 정의해줍니다. 절제하는 사람인지 표현하는 사람인지, 이성적인지 감성적인지, 무언가를 시작하기 전에 생각을 많이 하는 편인지, 바로 행동으로 옮기는 스타일인지.

장인정신이 깃든 헬싱키는 북유럽 디자인의 품격을 제시합니다. 오랫동안 사용할 수 있도록 제작된 헬싱키로 오늘과 앞으로 있을 나날들에 행복을 더해보세요.

헬싱키는 삶에 행복을 가져다주는 좋은 선택입니다.

Shop
helsinki-sandstone-grey-106131-300dpijpg
helsinki-misty-blue-14093-72dpijpg

Made to share


헬싱키는 기분 좋은 순간들을 함께하기 위해 제작되었습니다. 소중한 사람들과 즐거운 시간을 보낼 때 나만의 플레이리스트로 분위기를 더해보세요.

Shop

Music on the move


블루투스로 쉽게 연결이 가능하고 파워풀한 배터리와 가죽 스트랩을 장착하고 있는 헬싱키는 자유롭게 이동하며 사용할 수 있는 제품입니다.

삶은 여행하는 것이며, 우리는 그 여행을 만끽해야 합니다.

헬싱키를 소유하는 것은 삶의 기쁨이 될 것입니다.

Shop
20141215_vifa22116_72-dpijpg
20141215_vifa21698_72-dpijpg

Petite, but powerful


헬싱키는 작은 몸으로 믿을 수 없을 만큼 웅장한 사운드를 뿜어냅니다. 당신 안에 내재되어 있는 최대치의 소리를 경험하게 된다면 아주 작은 사이즈의 스피커가 어떻게 그렇게 큰 힘을 가질 수 있는지 조금은 이해할 수 있을 겁니다.

헬싱키로 음악을 듣고 즐기세요.

Shop
close

Full Range

The Vifa 50mm full range driver act as midrange and tweeter at the same time and thereby handles the frequency range from approx. 250Hz up to 18000Hz. Left and right channel full range drivers are spaced apart as much as possible and angled slightly backwards and to the sides to satisfy optimal performance at various listening heights and maximum stereo width. It sits in its own separate enclosure to avoid modulation from the woofers and for exact control of roll-off characteristics. The full range driver is designed with a rigid and light aluminum cone and dust cap with specially designed geometry for smooth and extended frequency response. A vented aluminum voice coil former ensures low moving mass and good cooling properties. A copper cap on the pole piece helps to reduced unwanted distortion and extends the frequency response. The powerful Neodymium magnet ensures high efficiency in a compact size. It all adds up to a very coherent and natural reproduction of the midrange and treble frequencies bringing out that authentic sound experience.  

close

Force Balanced Woofer

The Vifa Force Balanced Woofer incorporates two identical 60mm diameter custom made woofers mounted back to back. The Force Balanced Woofer is positioned in the speaker enclosure so that one woofer is radiating from the front side and the other is radiating from the rear side. Both woofers move in and out at the same time but due to the 180 degree opposite orientation, the mechanically induced vibrations that would normally be transferred to the enclosure are outbalanced by the opposite movement. The two woofers are mechanically fixed to each other – rear side against rear side – forming a very rigid and solid construction that forms a perfect platform for the woofer to start and stop with great precision and also to maintain the precise and undisturbed micro movements of the woofer. This enhances bass precision greatly and forms a very strong mechanical connection between front side and rear side of the speaker enclosure. This leads to lower coloration and lower mechanical vibration noise.

close

Digital Pure Path Amplifier

A great audio amplifier multiplies the input signal and provides the amplified signal to the drivers without lacking power or adding artifacts.

At Vifa we have a straightforward and simple strategy to designing amplifiers. We keep the signal in digital domain as much as we can, so it won’t be affected by noise. Next, we handle the digital signal just as gently as if we operated in an analog domain.

The amplification in our products is handled by switched (class-D) power amplifiers of the Digital Pure Path type. It has four powerful separate amplifier channels for maximum headroom and optimal performance. It conjoins with a high performance DSP (Digital Signal Processor) which completes the 100% digital signal chain and complements the product by having very low noise output, low distortion and a high dynamic range.

With this, we obtain the authentic sound that has become Vifa’s trademark.

close

Battery (Li-Ion)

The embedded battery makes it possible for you to enjoy your music literally everywhere.

Superior power capacity, lifetime and eco-friendliness are ensured by Vifa’s choice of Lithium-ion batteries from renowned brands very high quality level.  

These batteries deliver high power instantaneously and keep the dynamics in the music you listen to.

 

 

 

 

 

 

 

 

 

close

Symmetric Passive Radiator

The Vifa Passive Radiator uses a 40mm x 70mm flat rigid cone that moves with a resonance frequency determined by a precisely calculated weight/mass mounted in a soft linear long-throw suspension. This is to some extend comparable to using a bass port tube also referred to as a vented system. For a small enclosure, a vented system would require a long and narrow tube in order to obtain a resonance frequency low enough. This would take up a large portion of the limited volume inside the enclosure and also create loud noise as the air moves in and out of both ends of the narrow tube. The Passive Radiator takes up no space inside the cabinet and creates no noise. The Symmetric Passive Radiator design by Vifa uses two passive radiators mounted on opposite sides of the speaker cabinet at equal distances from the active Force Balanced Woofer. This outbalances the mechanical impact on the cabinet and ensures same work load on both woofers and both passive radiators. It all adds up to a very impressive bass reproduction from a physically small speaker.

close

Full Range

The Vifa 50mm full range driver act as midrange and tweeter at the same time and thereby handles the frequency range from approx. 250Hz up to 18000Hz. Left and right channel full range drivers are spaced apart as much as possible and angled slightly backwards and to the sides to satisfy optimal performance at various listening heights and maximum stereo width. It sits in its own separate enclosure to avoid modulation from the woofers and for exact control of roll-off characteristics. The full range driver is designed with a rigid and light aluminum cone and dust cap with specially designed geometry for smooth and extended frequency response. A vented aluminum voice coil former ensures low moving mass and good cooling properties. A copper cap on the pole piece helps to reduced unwanted distortion and extends the frequency response. The powerful Neodymium magnet ensures high efficiency in a compact size. It all adds up to a very coherent and natural reproduction of the midrange and treble frequencies bringing out that authentic sound experience.  

close

Force Balanced Woofer

The Vifa Force Balanced Woofer incorporates two identical 60mm diameter custom made woofers mounted back to back. The Force Balanced Woofer is positioned in the speaker enclosure so that one woofer is radiating from the front side and the other is radiating from the rear side. Both woofers move in and out at the same time but due to the 180 degree opposite orientation, the mechanically induced vibrations that would normally be transferred to the enclosure are outbalanced by the opposite movement. The two woofers are mechanically fixed to each other – rear side against rear side – forming a very rigid and solid construction that forms a perfect platform for the woofer to start and stop with great precision and also to maintain the precise and undisturbed micro movements of the woofer. This enhances bass precision greatly and forms a very strong mechanical connection between front side and rear side of the speaker enclosure. This leads to lower coloration and lower mechanical vibration noise.

close

Digital Pure Path Amplifier

A great audio amplifier multiplies the input signal and provides the amplified signal to the drivers without lacking power or adding artifacts.

At Vifa we have a straightforward and simple strategy to designing amplifiers. We keep the signal in digital domain as much as we can, so it won’t be affected by noise. Next, we handle the digital signal just as gently as if we operated in an analog domain.

The amplification in our products is handled by switched (class-D) power amplifiers of the Digital Pure Path type. It has four powerful separate amplifier channels for maximum headroom and optimal performance. It conjoins with a high performance DSP (Digital Signal Processor) which completes the 100% digital signal chain and complements the product by having very low noise output, low distortion and a high dynamic range.

With this, we obtain the authentic sound that has become Vifa’s trademark.

close

Battery (Li-Ion)

The embedded battery makes it possible for you to enjoy your music literally everywhere.

Superior power capacity, lifetime and eco-friendliness are ensured by Vifa’s choice of Lithium-ion batteries from renowned brands very high quality level.  

These batteries deliver high power instantaneously and keep the dynamics in the music you listen to.

 

 

 

 

 

 

 

 

 

close

Symmetric Passive Radiator

The Vifa Passive Radiator uses a 40mm x 70mm flat rigid cone that moves with a resonance frequency determined by a precisely calculated weight/mass mounted in a soft linear long-throw suspension. This is to some extend comparable to using a bass port tube also referred to as a vented system. For a small enclosure, a vented system would require a long and narrow tube in order to obtain a resonance frequency low enough. This would take up a large portion of the limited volume inside the enclosure and also create loud noise as the air moves in and out of both ends of the narrow tube. The Passive Radiator takes up no space inside the cabinet and creates no noise. The Symmetric Passive Radiator design by Vifa uses two passive radiators mounted on opposite sides of the speaker cabinet at equal distances from the active Force Balanced Woofer. This outbalances the mechanical impact on the cabinet and ensures same work load on both woofers and both passive radiators. It all adds up to a very impressive bass reproduction from a physically small speaker.


Inside Out

helsinki-drawingpng
Dimensions

Dimensions

156 mm/210 mm/70 mm

Weight

Weight

1.4 kg

Colors

Colors

윌로우 그린, 미스티 블루, 더스티 로즈, 샌드스톤 그레이

Connectivity

Connectivity

블루투스 4.0 aptX
AUX 3.5 mm mini-jack
NFC

Battery

Battery

충전용 리튬 배터리

Materials

Materials

Frame/다이캐스트 알루미늄
Enclosure/폴리카보네이트
Grills/ 크바드라트(Kvadrat) 텍스타일

Drive units

Drive units

Fullrange
2 x 50 mm 비파 유닛 (알루미늄 콘, 네오디뮴 마그넷 장착)

Woofer
2 x 60 mm 비파 유닛 (플랫 샌드위치 콘, 알루미늄 마그넷 장착. 2개의 패시브 라디에이터가 우퍼와 맞닿아 있는 형태로 힘의 평형이 이루어지는 구조)

Frequency response

Frequency response

58 Hz - 18 kHz @ +/- 3 db

Technical features

Technical features

블루투스 aptX
리튬 이온 배터리
포스 밸런스드 우퍼
디지털 퓨어 패스 앰플리파이어
높은 정밀도를 위해 최적화된 DSP 크로스오버

In the box

In the box

쇼트 가죽 스트랩, 전원 케이블, AUX 3.5 mm 미니잭 케이블, 트래블백, 매뉴얼, 퀵가이드, 보증서


비파의 새로운 소식을 뉴스레터로 받아보세요